Ambiente ARP EC by Edmundo Cassis

Oscillator 1 timbre

Both sawtooth and square oscillators are enabled.

Pulse width of square oscillator is set to 74% (50% is perfectly square, 100% is very short pulsewave) and is modulated by Mod Wheel, LFO 1.

Mod Wheel mod-matrix 3 modulation amount for pulse width of square oscillator is 48.

LFO 1 direct modulation amount for pulse width of square oscillator is 123. LFO 1 mod-matrix 1 modulation amount for pulse width of square oscillator is 51.

Oscillator 2 timbre

Volume level for oscillator 2 is manually set to 255.

Tone for oscillator 2 is off.

Volume (VCA) volume

Amplification level is set to 6dB (255) and is modulated by Mod Wheel, VCA Env.

Mod Wheel mod-matrix 7 modulation amount for amplification level is 12.

VCA Env direct modulation amount for amplification level is 255.

Pan spread is manually set to 54.

Oscillators ranges timbre

Oscillators 1 range is 4'.

Oscillators 2 range is 4'.

Noise timbre

Noise level is manually set to 105.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 2146.03Hz (160) and is modulated by Pressure.

Pressure mod-matrix 5 modulation amount for low-pass filter cut-off frequency is 93.

Low-pass filter envelope amount is modulated by Note Vel, Note Num.

Note Vel direct modulation amount for low-pass filter envelope amount is 128.

Note Num direct modulation amount for low-pass filter envelope amount is 121.

Filter has no resonance.

Oscillator drift & unison detuning timbre

Unison detune level is off.

Oscillators drift level is manually set to 29. Drift rate is 19

Oscillator 2 pitch pitch

Oscillator 2 pitch is set to -12 semitones and is modulated by Mod Env.

Mod Env mod-matrix 6 modulation amount for oscillator 2 pitch is 127.

Arpeggiator pitch

Arpeggiator rate is 120 bpm with a clock divider of 1/16 and is set to key synchronisation mode.

Arpeggiator gate is manually set to 128.

Arpeggiator mode is As Played (9) over 2 octaves. Looping gate/velocity pattern is user pattern 19.

FX routing & levels fx

FX mode is set to Insert, and routing is

Effect 1 level is manually set to 0. Effect 2 level is manually set to 100. Effect 3 level is manually set to 100. Effect 4 level is manually set to 100.

Gated Reverb fx

not yet complete

Delay & Reverb fx

not yet complete

Flanger fx

not yet complete

Phase fx

not yet complete


Mod Wheel modulator

Controls LFO 2 Slew Rate, OSC 1 Pulse Width Modulation Depth, VCA Gain for All Voices.

functiontypedestinationamount
matrix LFO 2 Slew Rate 73
timbre matrix OSC 1 Pulse Width Modulation Depth 48
volume matrix VCA Gain for All Voices 12

Pressure modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre matrix VCF Cut-off Frequency 93

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 121

Note Vel modulator

Controls VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.

functiontypedestinationamount
menu VCF Envelope Velocity Sensitivity 128
menu VCA Envelope Velocity Sensitivity 128

LFO 1 modulator

Controls OSC 1 Pulse Width Modulation Depth, VCA Pan.

functiontypedestinationamount
timbre fader OSC 1 Pulse Width Modulation Depth 123
timbre matrix OSC 1 Pulse Width Modulation Depth 51
volume matrix VCA Pan 85
namevalue
LFO 1 Rate 0.68Hz (97)
LFO 1 Delay / Fade 1.86s (72)
LFO 1 Shape Ramp Up
LFO 1 Key Sync off
LFO 1 Arp Sync on
LFO 1 Mono Mode 0
LFO 1 Slew Rate 65

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 255
namevalue
VCA Envelope Attack Time 0s (0)
VCA Envelope Decay Time 1.47s (151)
VCA Envelope Sustain Level 0% (0)
VCA Envelope Release Time 1.26s (137)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 0
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 0
VCA Envelope Attack Curve 0

Mod Env modulator

Controls OSC 2 Pitch.

functiontypedestinationamount
pitch matrix OSC 2 Pitch 127
namevalue
Mod Envelope Attack Time 0s (0)
Mod Envelope Decay Time 1.13s (128)
Mod Envelope Sustain Level 50% (128)
Mod Envelope Release Time 1.13s (128)
Mod Envelope Trigger Mode Control Sequencer Step (4)
Mod Envelope Attack Curve 128
Mod Envelope Decay Curve 0
Mod Envelope Sustain Curve 128
Mod Envelope Attack Curve 0

Ctrl Seq modulator

Controls Mod Envelope Trigger Mode.

functiontypedestinationamount
env-trigger Mod Envelope Trigger Mode
namevalue
Ctrl Sequencer Enable on
Ctrl Sequencer Clock Divider 13
Sequence Length 14
Sequencer Swing Timing 0
Key Sync & Loop 1
Slew Rate 0
Seq Step Value 1 207
Seq Step Value 2 255
Seq Step Value 3 221
Seq Step Value 4 255
Seq Step Value 5 203
Seq Step Value 6 195
Seq Step Value 7 255
Seq Step Value 8 203
Seq Step Value 9 178
Seq Step Value 10 134
Seq Step Value 11 185
Seq Step Value 12 235
Seq Step Value 13 208
Seq Step Value 14 240